Besides petrol and lubricants, Minh Phat also offer products such as solvents, asphalt, and other petrochemical products. Each product is sold by Minh Phat have achieved the highest quality, environmentally friendly and attractive price.

With the process of storing and transporting regulated to ensure products to customers quickly, absolute safety.

 

 

NDN can be used for the following applications:
– Asphalt concrete cutting
– Concrete stone mortar resin (SMA)
– Asphalt concrete hollow and very empty (Porous Asphalt)
– Class sparse (Very thin overlay)
– SAMI, sprinkle stone …
– Applied produce improved products such as bitumen emulsions, polymer asphalt, liquid asphalt, asphalt emulsion polymers.

Typical indicators:

Quota Test method Results
Softening temperature, oC ASTM D36 / AASHTO T53 46 – 55
Penetration at 25 ° C, 0,1 mm, 5 seconds ASTM D5 / AASHTO T49 60 – 70
Ignition temperature ASTM D92 / AASHTO T48 > 230 °C
Specific weight, g/cm3 ASTM D70 1,00 – 1,05
The length at 25 ° C, 5 cm/min, cm ASTM D6084 / AASHTO T51 > 100
The amount of dissolved in Trichloroethylene ASTM D5892 / AASHTO T49 > 99
Sticking level TCVN 7504 / AASHTO T182 > Level 3
Paraffin amount, % TCVN 7503

DIN EN 12606-1

< 2,2
Thin film oven test (TFOT)
Loss (163 oC in 5 hours) ASTM D1754 / AASHTO T179 < 0,8 %
Penetration ratio after firing ASTM D5 / AASHTO T49 > 75

Note: Standard ISO 7493 equivalent: 2005, 22, 279 BC – 01.

Packaging, storage 

The recommended temperature range when applying NĐN products.

Storage 80oC – 120oC
Mixing 150oC – 165oC

Heavy asphalt: storage and transport by devices with full dedicated systems and thermal insulation.

Safety and health issues

NDN fully achieved standards of safety and health in the fields of industry, does not cause any notable risk when used as directed.

Source: PLC

MC can be used for the following applications:
– Irrigation and bruises, irrigation tack
– Making pavement infiltration
– Asphalt concrete cools
– Coating curing concrete viaduct
– Used in the maintenance and reinforcement dirt roads, gravel roads reinforced …

Typical indicators

Quota Test method Results
MC 30 MC 70
Dynamic viscosity ở 60 oC, cSt ASTM D2170 30 – 60 70 – 140
Ignition temperature, oC ASTM D3143 ≥ 38 ≥ 38
Water content, % ASTM D95 ≤ 0,2 ≤ 0,2
Laboratory distillation: ASTM D402
– Distilled to 225 ° C , % ≤ 25 ≤ 20
– Distilled to 260 oC , % 40 – 70 20 – 60
– Distilled to 316 oC , % 75 – 93 65 – 90
Plastic content obtained after distillation in 360 oC,% ≥ 50 ≥ 55
xperiments on the plastic after distillation
– Penetration at 25 ° C, 5s, 100g, 1/10 mm ASTM D5 120 – 250 120 – 250
– The length at 25 ° C, cm ASTM D113 ≥ 100 ≥ 100
– The amount of dissolved in Trichloroethylene, % ASTM D2042 ≥ 99 ≥ 99

Packaging, storage 

The recommended temperature range when applying cutback asphalt-MC

Storage 10oC – 30oC

Mix, spread 70oC – 110oC

Cutback asphalt storage and transport by the specialized equipment or drum .
Storage and use of the product at room temperature to avoid direct contact with the heat source.

Safety and health issue

Cutback asphalt-Petrolimex reach the standards of safety and health in the fields of industry, does not cause any notable risk when used as directed.

Source: PLC

Instructions for use the original acid emulsion asphalt in the construction traffic.

TT Scope of use Bituminous emulsions acids
CRS-

1

CRS-

2

CMS-

2

CMS-

2h

CSS-

1

CSS-

1h

1 Aggregates mixed emulsions
1.1 Mixed cold at mixing station
Mixed use open-graded aggregate X X
Mixed use tightly graded aggregate X X
Aggregate mixtures using sand X X
1.2 Mixed at the scene
Mixed use open-graded aggregate X X
Mixed use tightly graded aggregate X X
Aggregate mixtures using sand X X
Aggregate mixtures using sandy ground X X
Plastic mortar (a mixture of emulsion, fine-grained aggregates, mineral powder and water are mixed together) X X
2 Aggregate processing with emulsion
2.1 Surface process
Surfacing layer X X
Surfacing laminated layer X X
Plastic irrigation and sprinkle sand X X
2.2 Macadam pavement penetrate
Macadam has an large empty class X
Macadam has an empty small class X
3 Emulsion processing
3.1 Surface treatment (spray on the old road surface to limit the bubble out of the aggregate) X* X*
3.2 Used as absorbent layer between the base and the plastic asphalt X* X*
3.3 Used as a sticky layer of cling between layers of asphalt concrete or between the oldroad surface and the plastic concrete layer X* X*
3.4 Handling dust X* X*
3.5 Handling surface cracks X X X X

Notes:
– * can dilute acid asphalt emulsion with water (consult the manual testing of water mixed with standard 22 TCN 354 -06 before using.
– With Vietnam climate characteristics, should using asphalt emulsion resin acids which form obtained from experiments to determine the amount of metal plastic subsidence (at 25 ° C, 100 g, 5 seconds) is not greater than 100 (1 / 10mm).

Source: PLC

Alignment of SBS in Petrolimex asphalt polymer create a frame three-dimensional solid, minimizing the impact of environmental temperature outside asphalt layer, increased module stiffness at high temperatures and have good elasticity even when the temperature is low (against breakage). In addition, the Petrolimex Asphalt polymer also enhance the ability of anti-aging, reduce distortions and promote permanent good effect in areas with frequent high pressure onto the pavement.

PMB can be used for the following applications:

– Asphalt concrete cutting high intensity
– Stone Mastic Asphalte (SMA)
– Coating Asphalt thin and very thin textured (VTO)
– Highways, roads Heavy truck.
– Production of asphalt emulsion polymers and other plastic products line
– Making anti-cracking layer SAMI

Typical indicators

Quota Standard 
application
Results
PMB I PMB II PMB III
Softening temperature, oC 22 TCN 319-04 ≥ 60 ≥ 70 ≥ 80
Penetration at 25 ° C, 0,1 mm, 5 seconds 22 TCN 319-04 50-70 40-70 40-70
Ignition temperature , oC 22 TCN 319-04 ≥ 230 ≥ 230 ≥ 230
Losses at 163 oC, 5 hours, % 22 TCN 319-04 ≤ 0,6 ≤ 0,6 ≤ 0,6
Penetration ratio, % 22 TCN 319-04 ≥ 65 ≥ 65 ≥ 65
The amount of dissolved in
Trichloroethylene , %
22 TCN 319-04 ≥ 99 ≥ 99 ≥ 99
Density 25 oC, g/cm3 22 TCN 319-04 1,00 – 1,05 1,00 – 1,05 1,00 – 1,05
Sticking quota 22 TCN 319-04 ≥ Level 4 ≥ Level 4 ≥ Level 4
Elasticity at 25 ° C,
Model extends 10 cm,%
22 TCN 319-04 ≥ 60 ≥ 65 ≥70
Storage stability, oC 22 TCN 319-04 ≤ 3,0 ≤ 3,0 ≤ 3,0
Viscosity at 135 oC, Pa.s 22 TCN 319-04 ≤ 3,0 ≤ 3,0 ≤ 3,0

Product Manual

The recommended temperature range when applying PMB

Recommended temperature
Storage 135 – 165 oC
Mixed with aggregate 160 – 185 oC
Sprinkle mixture 135 – 165 oC
– Start 130 – 160 oC
– End 95 – 140 oC

Safety and health issues

PMB reaching full standards of safety (use, fire and explosion) and health in the industry, does not cause any risk that merit concern when used as directed.

Download more information about the product:

– PMB 3 Profile